ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า

A flight controller with a built-in Serial ELRS receiver and 4-IN-1 Blheli_S 12A ESC specially developed for Digital HD FPV, which removes the analog OSD chip 7456, optimizes the PCB layout, and supports 1-2S Lipo/LiHV lithium batteries, very Suitable for Digital HD Tinywhoop/Cinewhoop/Toothpick and other small FPV drones. The flight controller uses the F405 chip, supports Betaflight/INAV firmware, has 3 sets of complete UARTs available, and integrates a BMP280 barometer and 8Mbp blackbox, which greatly enhances the playability of the flight controller.

Specifications:
Brand Name: Happymodel
Item Name: CrazyF405HD ELRS 1-2S AIO Flight controller
Mount size: 25.5mmx25.5mm
Weight: 4.8g without power lead wire
Firmware target: BetaflightF4
Support 1-2s Lipo/LiHV battery

Flight controller MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
GYRO Sensor: BMI270  (SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Serial ExpressLRS 2.4GBuilt-in BMP280 Barometer
Built-in 8MBp blackbox
Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeli_S Bluejay firmware
Factory firmware: Bluejay ESC V0.19Firmware target: Z-H-30
Default protocol: DSHOT300
When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200
Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna: enameled copper wire 31mm length
Telemetry output Power: <12dBm
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP1/2 2400 RX
Could update firmware via ExpressLRS configurator

 

For original factory 4.3.2 version firmware, if you want to use BMP280 barometer, please connect to betaflight configurator and then move to CLI command, then type the following command:

resource I2C_SCL 2 B10
resource I2C_SDA 2 B11
set baro_bustype = I2C
set baro_i2c_device = 2
save
 
If you upgrade the firmware to 4.4.2 and want to use BMP280 barometer, please add BPM280 support to custom defines, following the procedure:
1. Enable expert mode on firmware flasher tab
2. Add BARO_BMP280 to custom defines
3. Flash the board
4.Configure resources for external BARO device for the flight controller in CLl:
 
resource I2C_SCL 2 B10
resource I2C_SDA 2 B11
set baro_bustype = I2C
set baro_i2c_device = 2
save
เงื่อนไขอื่นๆ

 

Tags

วิธีการชำระเงิน

เมื่อลูกค้าทำการสั่งซื้อเป็นที่เรียบร้อย กรุณาทำตามนี้ได้เลยครับ

1.ทำการทัก  Line ID : @fpvonly [อย่าลืม@] เพื่อทำการแจ้งหมายเลข ออเดอร์ของการสั่งซื้อ หรือสามารถแจ้งความต้องการสินค้าทาง Line กับ ADMIN เท่านั้น หากมีปัญหา 0891198483
2. ADMIN จะทำการ ส่งเลขบัญชี ให้ทำการโอนเงิน
3. เมื่อทำการโอนเงินเรียบร้อยแล้ว สามารถส่งสลิป เพื่อยืนกับ ADMIN
4. ร้านจะทำการส่งในรอบถัดไป



When the customer completes the order please follow this
 
1. Message Line ID : @fpvonly [Don't forget @] to inform the number of the order or can inform the product need via line with admin. If you have problem contact facebook.com/fpvonly
 
2. Admin will send the account number to transfer money.
 
3. Once the money transfer has been completed can send slip to confirm with the admin
 
4. The shop will deliver in the next round.
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาฟิวเจอร์ ออมทรัพย์

นโยบายการเปลี่ยนหรือคืนสินค้า

- สินค้าใหม่ซื้อแล้วไม่รับคืนในทุกกรณี
- สินค้าที่บัดกรีแล้ว ไม่สามารถคืนได้ในทุกกรณี 
- สินค้าที่มีปัญหาโดยผ่านการวินินฉัยว่าเกิดจากตัวสินค้าเอง และไม่ได้ผ่านมือผู้เล่น สามารถติดต่อกับร้านค้า เพื่อทำการเปลี่ยนแปลง เช่น FC ESC ห้ามบัดกรี เด็ดขาด หากมีปัญหา ส่งให้ร้านวินิฉัย
- ลำสำเร็จจากโรงงาน ที่ลูกค้านำไปเซ็ตเอง หากเกิดความเสียหาย มิได้อยู่ในความรับผิดชอบของร้าน แต่สามารถขอคำปรึกษาได้ หากมีการซ่อม คิดค่าใช้จ่ายตามความเป็นจริง หากมีการเป็นธุระติดต่อกับโรงงาน ใช้ระยะเวลาตามจริง ไม่สามารถ เปลี่ยน หรือคืนสินค้าได้  
- กรณีเกิดการสูญเสียจากการช๊อต การไหม้ ไม่สามารถเปลี่ยนสินค้าได้
- สินค้าที่มีการบักกรีแล้วหากมีปัญหา ไม่สามารถเปลียนได้ [โรงงานไม่รับในทุกกรณี]
- สินค้าทุกชิ้นไม่มีประกัน
- ลูกค้าสามารถติดต่อโดยตรงกับผู้ผลิตได้ หากสินค้ามีปัญหา
- ลูกค้าสามารถสอบถามอะไหล่ได้ หากไม่มีร้านค้าจะเป็นธุระในการสั่งซื้อจากต่างประเทศให้

รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านFPVONLY
FPVONLY
fpvonly
เบอร์โทร : 0891198483
อีเมล : thai.cheer@hotmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม